가스켓 제조 솔루션

Gasket Material

> Gasket Material > Data Sheet

Data Sheet

Specification Data Sheets and Typical Data Sheets

Value Grade

CMP-4200

870

Description:

CMP-4200 is a solvent-free, high performance compressed MicroPore gasket material. It was developed for steam, water, oil, and chemical resistance in Original Equipment and Industrial applications. It has exceptional sealability, torque retention, crush and blowout resistance, and is intended for applications with short duration maximum temperatures up to 350℃ (650℉).

Property :	Specification :	Method :
Density, g/cc(lb/cu.ft)	1.55 (97) (min.)	ASTM F 1315
Compressibility, % (at 34.5MPa)	7 - 17	ASTM F 36
Recovery, %	50 (min.)	ASTM F 36
Tensile Strength, AMD, MPa(psi)	12 (1740) (min.)	ASTM F 152
Flexibility, Mandrel Bend, 12 X Ga.	No Cracks	ASTM F 147
Fluid Resistance, IRM903 Oil		ASTM F 146
Change in Thickness, %	15 (max.)
Change in Weight, %	25 (max.)
Change in Tensile Strength, %	30 (max.)
Change in Compressibility, %	17 (max.)
Fluid Resistance, Fuel B		ASTM F 146
Change in Thickness, %	15 (max.)
Change in Weight, %	20 (max.)	ASTM F 146
Binder Type	Fully Cured Nitrile Butadiene/Styrene Butadiene Rubber Blend
Color	Grey

Remarks and Related Documents :

Specification values determined by the test methods required for ASTM F-104, Type 7 materials.

Hydro-Fused, MicroPore, Pro-Formance, Syntheseal, Thermo-Tork, Select-a-Seal and Voltoid are registered trademarks of Interface Solutions, Inc.

WARNING: The description and performance data provided herein constitute a material specification for quality control purposes, but do not imply suitability for use in a specific application. Your specific application should not be undertaken without independent study and evaluation for suitability. Failure to select proper sealing products may result in either property damage or personal injury. For specific application recommendations, contact Interface Solutions. INTERFACE SOLUTIONS EXPRESSLY DISCLAIMS ALL WARRANTIES EITHER EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL ISI BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THE INFORMATION CONTAINED IN ITS SPECIFICATION DATA SHEETS, ITS PRODUCTS OR THEIR FUTURE USE BY YOU OR ANY THIRD PARTIES, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.