Specification Data Sheets and Typical Data Sheets
CMP-4000
CMP-4000 is a high performance, compressed MicroPore material, combining a unique synthetic fiber matrix and fully cured nitrile butadiene rubber binder. It has excellent sealability and torque retention properties and is recommended for OEM and Industrial applications with short duration maximum temperatures up to 350℃ (650℉).
CMP-4200
CMP-4200 is a solvent-free, high performance compressed MicroPore gasket material. It was developed for steam, water, oil, and chemical resistance in Original Equipment and Industrial applications. It has exceptional sealability, torque retention, crush and blowout resistance, and is intended for applications with short duration maximum temperatures up to 350℃ (650℉).
HFL-781
HFL-781 is a high density, controlled swell gasket material with styrene butadiene and natural rubber binders. It is used in heavy duty oil sealing applications such as diesel engine oil pans and front covers. It is intended for applications with short duration maximum temperatures up to 290℃ (550℉).
HFL-971
HFL-971 is a high density material with a combination of fully cured nitrile butadiene binder and thermoset resin for superior mechanical strength in heavy-duty applications. It has exceptional tensile strength, crush resistance, blowout resistance, erosion resistance, and resistance to shear and friction damage in dynamic joints. It is intended for applications sealing transmission fluid, axle lube, oil, fuel, coolant, water, and steam with short duration maximum temperatures up to 350℃ (650℉).
MP-15
MP-15 gasket material is design for heavy-duty applications including compressors, diesel engines, and others. It has excellent low flange pressure sealability and bolt torque retention. It is intended for applications with short duration maximum temperatures up to 205℃ (400℉).
MP-2N
MP-2N is specifically engineered for automotive powertrain, marine and small engine applications. It provides exceptional sealability for coolant, lubrication, and induction systems. It conforms well to irregular flange surfaces and is intended for applications with short duration maximum temperatures up to 205℃ (400℉).
N-8092
N-8092 is used in automotive, small engine, and compressor applications. It has excellent crush resistance at high flange pressures, and excellent sealing properties with oil, fuel, and water. It is intended for applications with short duration maximum temperatures up to 180℃ (350℉).
PF-4N
PF-4N has a fully cured nitrile butadiene rubber binder for maximum fluid resistance. It has excellent sealability in a variety of environments and flange conditions. It is intended for applications with short duration maximum temperatures up to 290℃ (550℉).
PF-4S
PF-4S is designed for various oil, air, and coolant applications such as oil pans, front covers, intake manifolds and rear seals. It is a replacement for styrene butadiene rubber bound asbestos and nonasbestos calendared sheet materials and offers improved oil sealability over nitrile butadiene bound materials. It is intended for applications with short duration maximum temperatures up to 290℃ (550℉).
