logo
facebook twitter kakao
Gasket Material
> Gasket Material > Data Sheet
Data Sheet

Specification Data Sheets and Typical Data Sheets

  • Standard

NV-519

1353

Description:

NV-519 is a cellulose fiber material with thermoset resin and nitrile butadiene rubber binder. It has excellent tensile strength, crush resistance, and erosion resistance against high volume fluid flow and impingement. It is used primarily in automatic transmission valve body, pump, and accumulator/channel plate applications as well as carburetors and air compressors. It is intended for use in applications with short duration maximum temperatures up to 180℃ (350℉).

 
Property :Specification :Method :
Density, g/cc(lb/cu.ft) 0.96 (60) (min.)ASTM F 1315
Compressibility, % (at 6.9MPa)5 - 15ASTM F 36
Recovery, % 60 (min.)ASTM F 36
Tensile Strength, AMD, MPa(psi)27.59 (4000) (min.)ASTM F 152
Fluid Resistance, IRM903 Oil  ASTM F 146
Change in Thickness, %10 (max.) 
Change in Weight, %30 (max.) 
Fluid Resistance, Fuel B  ASTM F 146
Change in Thickness, %10 (max. 
Change in Weight, %30 (max.) 
Fluid Resistance, Distilled Water  ASTM F 146
Change in Thickness, %70 (max.) 
Change in Weight, %70 (max.) 
Binder Type Nitrile Butadiene 
 
Remarks and Related Documents :
Specification values determined by the test methods required for ASTM F-104, Type 3 materials.

Hydro-Fused, MicroPore, Pro-Formance, Syntheseal, Thermo-Tork, Select-a-Seal and Voltoid are registered trademarks of Interface Solutions, Inc.

WARNING: The description and performance data provided herein constitute a material specification for quality control purposes, but do not imply suitability for use in a specific application. Your specific application should not be undertaken without independent study and evaluation for suitability. Failure to select proper sealing products may result in either property damage or personal injury. For specific application recommendations, contact Interface Solutions. INTERFACE SOLUTIONS EXPRESSLY DISCLAIMS ALL WARRANTIES EITHER EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR OF FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL ISI BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THE INFORMATION CONTAINED IN ITS SPECIFICATION DATA SHEETS, ITS PRODUCTS OR THEIR FUTURE USE BY YOU OR ANY THIRD PARTIES, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.